Mild steel, stainless steel and aluminium fabrication for frames, trellis, lockers, platforms and custom metal works.
Explore metal fabricationMetal & Glass Works · Singapore
Custom metal fabrication, glass installation and architectural metal-glass works for Singapore homes, offices, commercial premises and industrial sites — delivered by Ezzogenics with careful site measurement, material selection and project coordination.
Mild steel · stainless · aluminium · tempered · laminated · IGU · Low-E · site survey & shop drawings
Five core service lines covering most metal and glass scopes Singapore projects need — from a single shopfront door to a full balcony glass balustrade or industrial walkway.
Mild steel, stainless steel and aluminium fabrication for frames, trellis, lockers, platforms and custom metal works.
Explore metal fabrication
Tempered, laminated, heat-soaked, IGU/DGU and Low-E glass for windows, doors, partitions, shopfronts and mirrors.
Explore glass installation
Sliding doors, swing doors, custom metal doors and residential, commercial and industrial gates in mild steel, aluminium or stainless.
Explore doors & gates
Stainless steel railings, mild steel handrails and glass balustrades for balconies, staircases and walkways.
Explore railings
Glass facades, curtain wall panels, shopfronts and architectural metal support for new builds and refurbishments.
Explore facadesWe back recommendations with documented material data — EN 10025 grades, EN 10088 stainless, EN 573 aluminium and Singapore project conditions — and qualify standards wording so the QP, PE or project team can verify against project requirements.
View the steel comparison supplementEzzo catalogue systems
Metal Glass Work now carries the Ezzo catalogue families for measured aluminium-and-glass systems: heavy sliding doors, folding doors, thermal window systems, interior aluminium doors and skylight glazing. These are quoted after site measurement, not sold as fixed off-the-shelf packages.

Large-format aluminium sliding doors for landed homes, balconies, patios, shopfront openings and commercial spaces that need smooth operation and weather-aware detailing.

Folding aluminium door systems for wide openings, indoor-outdoor transitions, cafes, showrooms and residential extensions where the opening needs to stack neatly.

Casement, sliding, folding and electric lift window references for Singapore projects, with profile, glass and hardware selection confirmed during quotation.

Fixed, electric and retractable roof-glazing references for daylight, patios, extensions and upper-floor openings where water tightness and access must be planned properly.

Sliding, pivot, French and aluminium room-door references for homes, hotels and offices that need a cleaner finish than basic carpentry doors.
We shortlist suitable catalogue families, confirm feasibility during site measurement, then quote the frame, glass, finish, hardware and installation scope clearly.
Ask for catalogue guidanceBalcony glass balustrades, gate replacements, window glass, shower screens, mirrors, custom metal frames and shoe cabinets.
Glass partitions, shopfront glazing, sliding glass doors, kitchen-grade SS304/SS316 fabrication, signage frames and storefront gates.
Industrial gates, walkway railings, mezzanine handrails, structural framing references and access ladders for maintenance crews.
Featured project entries managed from the portfolio admin.
Singapore’s climate — high humidity, tropical rain, coastal salt air on the East and West coasts — drives most metal and glass selection decisions. Common questions we help answer:
Galvanised mild steel is cost-led but needs recoating; SS304 suits inland and most urban exposures; SS316 is preferred for coastal/marine; aluminium is light and corrosion-friendly but needs HAZ-aware design where welded.
Read the lifespan comparisonTempered glass for impact safety; laminated glass for fall-protection and post-breakage retention; Low-E and IGU/DGU for heat and glare; heat-soaked glass to lower NiS spontaneous breakage risk.
Read the glass selection guideWorking drawings, material comparisons and engineering checks we have prepared for our own projects — published as reference resources you can use during specification.
Yield, tensile, weldability, cross-material, cost, weight and platform-load tables for S235–S500, SS304/316 and aluminium.
A plain-English buyers’ guide to laminated, IGU, DGU, Low-E, tempered and heat-soaked glass for Singapore projects.
Mechanical strength, corrosion behaviour and design-code differences for handrail material selection in Singapore.
Send a few photos, the location, and what you need — we will reply with shortlist material options and approximate sizing before you compare quotations.
Project enquiry
Send the site details here and the enquiry will route into the Ezzogenics lead tracker.
We provide custom metal fabrication and glass installation in Singapore — doors, gates, railings, balustrades, shopfronts, facades and curtain-wall style glazing for homes, offices and industrial sites.
Yes — that is our specialty, for example glass-and-steel doors, framed glass partitions, glass balustrades with metal posts, and metal-framed shopfronts.
Yes — we fabricate to your drawings or site requirements in mild steel, stainless steel, aluminium and glass, with site measurement before fabrication.
Gates, grilles, railings, balustrades, staircases, canopies, frames and structural and decorative metalwork.
Yes — HDB, condominium and landed homes as well as offices, commercial premises and industrial sites across Singapore.
Send your drawings, photos or measurements to david@ezzogenics.com or call +65 9632 0750.